Menu
Background
Products
diamant
phono preamplifier
pyramide
control amplifier
power amplifier
headphone amplifier
Papers
Photogallery
Contact
News
Video
Reviews
Select your language
NL
EN
Natuurlijk geluid dat je raakt...
Phono preamplifier
Specifications:
Processes signals from moving magnet and moving coil pickup cartridges
Separate inputs for moving magnet and moving coil cartridges
Sensitivity moving coil cartridges >= 0.2 mV
Input impedance moving coil cartridges: selectable 50, 100 or 200 Ohm
Sensitivity moving magnet cartridges >= 2 mV
Input impedance moving magnet cartridges 47 kOhm
Accuracy of correction for disc cutting (RIAA) characteristic < 0.05 dB (30 Hz - 30 kHz)
Rumble filter 10 Hz, first order
Frequency response 10 Hz - 100 kHz
Output signal strength variable in three 6 dB steps for adjustment of cartridge sensitivity
Switching functions by gas filled micro relais on printed circuit boards for trouble-free operation
Diamant active loudspeaker system
Active 3-way loudspeaker system including
active 3-way cross-over filter
electronic compensation of the loudspeaker properties
4 power amplifiers (two in a bridge configuration)
Distortions minimised for human hearing
Impedance compensation for the loudspeaker units
Frequentie range: 16 – 35000 Hz (± 3 dB)
Time optimised
Pyramide active loudspeaker system
Active 3-way loudspeaker system including
active 3-way cross-over filter
electronic compensation of the loudspeaker properties
4 power amplifiers (two in a bridge configuration)
Distortions minimised for human hearing
Impedance compensation for the loudspeaker units
Frequentie range: 16 – 35000 Hz (± 3 dB)
Time optimised
Control amplifier
6 linear inputs
Input sensitivity 200 mVeff.
3 outputs
controlled for the Diamant / Pyramide / TC power amplifier
controlled for the (TC) headphone amplifier
not controlled for A/D converter
Amplification approx. 8 times
Input selection, volume and balance control, rumble filter by remote control
Frequency range 2 – 200 000 Hz (-3 dB)
Distortions minimised for human hearing
Power amplifier
Input sensitivity 1.5 Veff.
Amplification approx. 15 times
Output power 75 Weff / 6 Ω (= 8 Ω after impedance compensation)
Frequency range 2 – 150 000 Hz (-3 dB)
Powerbandwidth 2 – 50 000 Hz
Distortions minimised for human hearing
Headphone amplifier
Input sensitivity 1.5 Veff.
Amplification approx. 15 times
Applicable for headphones with minimum impedance of 30 Ω
Output power 400 mWeff at 300 Ω
Frequency range 2 – 150 000 Hz (-3 dB)
Power bandwidth 2 – 80 000 Hz
Distortions minimised for human hearing